Rebar
Beams
Channels
Tubes
Sheets
Angles
Bars
Stainless
Structural profiles
Coated sheet
Structures
Non-ferrous
Other
Angles
Equal angle
- Grades:
- S235JR
- S355J2
- Standard:
- EN 10056
- Lengths:
- 6 m (cut to size)
Size · 44 positions
Click a weight value to add that size to your request.
| Size, mm | Thickness, mm | kg/m |
|---|---|---|
| 20 × 20 | 3 | |
| 25 × 25 | 3 | |
| 25 × 25 | 4 | |
| 30 × 30 | 3 | |
| 30 × 30 | 4 | |
| 35 × 35 | 4 | |
| 40 × 40 | 4 | |
| 40 × 40 | 5 | |
| 45 × 45 | 4.5 | |
| 50 × 50 | 4 | |
| 50 × 50 | 5 | |
| 50 × 50 | 6 | |
| 60 × 60 | 5 | |
| 60 × 60 | 6 | |
| 60 × 60 | 8 | |
| 65 × 65 | 7 | |
| 70 × 70 | 6 | |
| 70 × 70 | 7 | |
| 75 × 75 | 6 | |
| 75 × 75 | 8 | |
| 80 × 80 | 8 | |
| 80 × 80 | 10 | |
| 90 × 90 | 7 | |
| 90 × 90 | 8 | |
| 90 × 90 | 9 | |
| 90 × 90 | 10 | |
| 100 × 100 | 8 | |
| 100 × 100 | 10 | |
| 100 × 100 | 12 | |
| 120 × 120 | 10 | |
| 120 × 120 | 12 | |
| 130 × 130 | 12 | |
| 150 × 150 | 10 | |
| 150 × 150 | 12 | |
| 150 × 150 | 15 | |
| 160 × 160 | 15 | |
| 180 × 180 | 16 | |
| 180 × 180 | 18 | |
| 200 × 200 | 16 | |
| 200 × 200 | 18 | |
| 200 × 200 | 20 | |
| 200 × 200 | 24 | |
| 250 × 250 | 28 | |
| 250 × 250 | 35 |
Angles
Equal angle in Riga: selection for a clear RFQ
The “Equal angle” section helps buyers specify steel, metal products or related materials for construction and fabrication in Riga and Latvia. Select it by task, form, quantity, drawing revision and delivery conditions. For structural, concrete or load-bearing work, final dimensions and the technical solution must be confirmed by the project designer or responsible specialist.
How should it be chosen?
Steel angle, angle iron and L section are common names for this product form. State whether an equal angle or unequal angle is required and give both leg dimensions.
Start with the item function, then compare the section or form, material requirement, relevant finish and method of joining, processing or installation. A catalogue name alone is rarely enough for a reliable order. State whether material is needed as full lengths, cut parts, a prepared set or work to a drawing. If processing is required, attach the drawing and identify the finished part.
Which details belong in the request?
Include the selected position, quantity, unit, required dimensions and delivery address. Add a drawing or specification when geometry matters. Material grade, coating, standard, tolerance, certificate and packing requirements should be stated only when they are defined by the project or purchasing specification. Unconfirmed data is clarified during the quotation process.
Where is it used and how is it ordered?
The product or service can be requested for construction, repair and fabrication. The relevant application is confirmed by the design documentation and installation method; do not use catalogue wording as a substitute for an engineering decision. Metāla Bāze can coordinate metal cutting, laser cutting, bending, welding and fabrication, surface treatment or delivery to site when required in the enquiry.
FAQ
- Can I receive a price without full details?
- A useful price requires at least the item, dimensions, quantity and delivery location. Processing or documentation requirements can change the quotation.
- Which dimensions should be sent?
- Send all dimensions that affect selection or production, preferably from the current drawing. For profiles and tubes, include the cross-section and wall thickness if specified.
- Is a drawing necessary?
- It is strongly recommended for cut, bent, welded or made-to-order parts. Mark the current revision and any critical notes.
- Can delivery be arranged in Latvia?
- Yes, include the site address, access conditions, unloading method and the preferred delivery window in the request.
Send an enquiry with the available specification, quantity and site address. We will clarify missing parameters and prepare a commercial offer for Riga, Latvia or the required delivery location.